Sheartak Helical Cutter head for General 30-125CEM1 15" Planer with 80 Carbide inserts. The spiral cutterhead is equipped with 80 carbide inserts along 5 spirals.
Each carbide insert has 4 indexable edges. The carbide inserts are slightly angled to the board feeding, which generates a shear cut, eliminates tear-out, and leaves a glossy surface finish on softwood, hardwood, and man-made board. It dramatically reduces operation noise.
Simply rotate the edge 90 degrees if it is dull or chipped and you will have a new sharp edge. Discard the inexpensive carbide inserts only when all four edges are affected and there is no need to sharpen the inserts. Sheartak spiral cutter heads reduce three-quarters of your sanding work and consume less power. These cutter heads remove short chips in a staggered way which avoids dust clogging at the hood port, leading to an improvement during dust extraction. Sheartak spiral cutter heads can pay back your initial investment in no time.
Spiral Cutterhead Kit includes:
* High tensile strength alloy steel cutter block.
* Two premium Japan NSK sealed bearings.
* 80 carbide inserts installed.
* 5 extra carbide inserts.
* 5 extra screws.
* 1 Wrench
* 1-year warranty for cutter block.
Ask Question About Product
Technical | |
Material of Cutterblock | Alloy Steel |
No. of Spirals | 6 |
No. of Carbide Inserts | 80 |
Carbide Insert Size | 15x15x2.5mm R150 30° |
Screw Size | T25 10#-32TPI |
Standard Kit | |
No. of Additional Knives | 5 |
No. of Additional Screws | 5 |
No. of Wrenches | 1 |